specification control drawing 307 constitution drive menlo park, ca 94025, usa wire and harnessing products title : soldersleeve device with pre-installed lead low temperature unless otherwise specified dimensions are in millimeters. inches dimensions are in between brackets. document no.: b-008-5x tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics rese rves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d020015 replaces: d981682 drawn by: m. foronda date: 4-mar-02 prod. rev. see table doc issue: 4 scale: none size: a sheet: 1 of 1 if this document is printed it becomes uncontrolled. check with the web for the latest revision. product revision product dimens ions cable dimensions part name l max a min b min k min d max e min f min j 1.00 (j 0.040) color code (item 3) b-008-51 a 31.00 (1.220) 2.30 (0.091) 3.00 (0.118) 150 (5.900) 2.30 (0.091) 1.50 (0.060) 0.80 (0.032) 11.00 (0.433) red B-008-52 a 36.00 (1.417) 4.30 (0.169) 5.10 (0.200) 150 (5.900) 4.30 (0.169) 2.10 (0.083) 1.20 (0.047) 11.00 (0.433) blue b-008-53 a 42.00 (1.654) 6.80 (0.270) 7.30 (0.290) 150 (5.900) 6.80 (0.268) 3.40 (0.134) 2.50 (0.098) 11.00 (0.433) clear material 1. insulation sleeve: heat-shrinkable, radiation cr oss-linked modified polyolefin. transparent clear. 2. solder preform with flux: solder: type cd18 per ansi j-std-006. flux: type rom1 per ansi j-std-004. 3. meltable rings: thermally stabilized thermoplastic. 4. ground lead: raychem 44a0111-20 in accordance with mi l-w-81044/12 or better, awg 20 stranded tin plated copper. color: white application 1. these parts are designed to provide an environmen t protected shield termination on cables rated for 105 c minimum, meeting the dimensional criteria listed and ha ving bare copper or tin plated shields. 2. temperature range: -55 c to +125 c. 3. install using raychem-approved convection or infrared hea ting tools in accordance with raychem installation procedure rpip-709-00. for best results, prepare the cable as shown:
|